DuraStor 412R/6320SS/7320SS Installation and User's Guide
6 Press 5 to select Firmware Upload.
Figure 4-7 Firmware Upload Screen
7 Press the u key (lower case) to start the upload. Using the
mouse, click on the pull-down menu Transfers and select Send.
Figure 4-8 Send File Dialog Box
8 Click Browse to locate the new Firmware file, then click Send.
The firmware file will have an S3R extension.
Note: Ensure that the protocol Xmodem is selected.
From the Xmodem File Send dialog box, you can monitor the
progress of the upload. You can safely stop the transfer without
affecting your existing firmware any time during the transfer
until it has been completed. The upload does not overwrite the
firmware during the upload process. It writes the new code into
4-12