Adaptec DURASTOR 6320SS Manual page 149

7 Connect the SCSI data cables from the DuraStor 6320SS to the
daisy-chain enclosures' SAF-TE disk I/O card as shown in
Figure C-8.
Power
Supply
SCSI Data Cable
Power
Supply
Figure C-8 Enclosure Cabling Diagram
8 Connect a SCSI data cable(s) from the host system(s) HBA(s) to the
host I/O card as indicated in
on page 2-15
The configuration is complete. Refer to the Storage Manager Pro
User's Guide or the Disk Array Administrator User's Guide for
instructions on how to set up and configure disk arrays.
Power Cooling
Supply Fans
Power Cooling
Supply Fans
or Advanced Cabling – DuraStor 6320SS on page
Advanced Configurations and Cabling
SAFTE Disk I/O
Chl 1 Chl 2
Host I/O
Chl 0 Chl 3
Host I/O
Chl 0 Chl 3
Ctlr 1 SAF-TE Ctlr 2
SAFTE Disk I/O
Chl 1 Chl 2
Ctlr 1 SAF-TE Ctlr 2
Basic Connections – DuraStor 6320SS
RAID Controller
SCSI Data Cable
C-21.
C-7