Adaptec DURASTOR 6320SS Manual page 24

5 (Single-Bus Mode installations only) Install the single-bus module
in the Controller 1 slot. (See
Cover Plate on page 5-9
6 Connect the SCSI data cable from the host system HBA to the
SAF-TE Disk I/O card Channel connector as shown in
and Figure 2-12.
Figure 2-11 Host Cabling Diagram – JBOD, Single-Bus Mode (DuraStor 412R)
Host Computer
Power Power
Supply Supply
Figure 2-12 Host Cabling Diagram – JBOD Dual-Bus Mode (DuraStor 412R)
The configuration is complete. Refer to the Storage Manager Pro
User's Guide or the Disk Array Administrator User's Guide for
instructions on how to set up and configure disk arrays.
Installing the Single Bus Module and
for detailed instructions.)
Cooling
Fans
Ctlr 1 SAF-TE
Setting Up Your Storage Subsystem
Ctlr 2
Figure 2-11
2-11