Table of Contents
Advertisement
DuraStor 412R/6320SS/7320SS Installation and User's Guide
Table 4-2
explains how to interpret the drive LEDs.
Table 4-2 Drive Status and Activity LEDs
Drive Status LED
Solid green
Flashing green
Solid green
Flashing green
Flashing green
Flashing amber
Solid amber
Solid amber
Off
Flashing amber
Solid green
Solid amber
Solid amber
Alternating
amber and green
The drive status LEDs are also used for the One-Touch
Annunciation monitoring system which can display the status of
controllers and SAF-TE card switch settings from the touch of the
Alarm Reset button. See
information.
4-4
Drive Activity LED
Solid green
Solid green
Solid green
Solid green
Solid amber
Solid amber
Solid amber
Solid amber
N/A
Solid amber
One-Touch Annunciation on page 4-5
Status
Powering on.
Drive ready, not assigned to an
array.
Drive ready, assigned to an
array.
Hot spare ready, assigned to an
array.
Drive error—Fault, not
assigned to an array.
Drive error—Fault, assigned to
an array.
Array critical, remaining good
drive LEDs.
Hot spare, rebuild mode (all
Drive Status LEDs).
Empty drive slot.
Drive manually disabled
(applies to LVD-LVD only).
Array is fault-tolerant.
Array is in rebuild mode.
Array has a failed drive.
Firmware checksum error.
for
Advertisement
Table of Contents
