Table of Contents
Advertisement
DuraStor 412R/6320SS/7320SS Installation and User's Guide
Advanced FC features
Advanced SCSI features
Configuration and
management
Board form factor
Backplane connector
E-8
Dual port embedded multitasking RISC
protocol engines
2 gigabit/sec Fibre Channel arbitrated
loop and switched fabric support
Full duplex send and receive payload
buffers capable of 1 gigabit/sec speed
Supports 64-bit PCI data path to deliver
bandwidth up to 266 MB/sec per
channel
Class 3 connection with FCP (SCSI)
protocols (class 1 and 2 capable)
Greater than 500 concurrent active
exchanges with rapid command context
change
Full backward SCSI compatibility
70 simultaneous commands and
Command Queuing supported
Reserve/Release (multihost ready, up to
15 initiators with single controller)
Ultra160 SCSI for data transfer up to 160
MB/sec
Ultra160 SCSI connection for up to 15
devices per channel (14 in Active-Active
mode)
Domain validation and CRC data
protection with Ultra160
Fibre Channel or RS-232 serial interface
to ANSI terminal or terminal emulator
Menu-based text interface over LCD
Operator Panel
Performance statistics monitoring; event
logging, rebuild, and verify utilities
SAF-TE and SMART environmental
monitoring support
AdminiStor support
4.25 in x 9.0 in PCB outline (10.80 cm x
22.86 cm)
2.7 in x 4.7 in daughter board PCB board
outline (6.86 cm x 11.94 cm)
1.1 in (2.79 cm) total height with
unbuffered DIMM,
1.2 in (3.05cm) with registered DIMM
376 I/O pin AMP Z-Pack HM series
Advertisement
Table of Contents
