Table of Contents
Advertisement
DuraStor 412R/6320SS/7320SS Installation and User's Guide
To use the One-Touch Annunciation, press and hold the Alarm
Reset button. The drive activity LEDs are turned off and the drive
status LEDs illuminate in unique combinations to designate certain
enclosure conditions.
their meanings when using the One-Touch Annunciation.
Table 4-3 Drive Status LEDs Used for One-Touch Annunciation
Drive Slot
Description
1
Bus configuration
2
Hot interface type
3
N/A
4
Switch 1 SCSI IDs
5
Baud rate, switch 6
6
N/A
7
Switch 2 SCSI IDs
8
Delay restart, switch 7
9
Controller 1
10
Switch 3 RAID addressing
11
Remote start switch 8
12
Controller 2
4-6
Table 4-3
describes the drive status LEDs and
Status LED On
Dual-bus
SCSI Host
Enabled
19,200 baud
Enabled
Disabled
Green: good
Amber: failed
Enabled for
RAID
Disabled
Green: good
Amber: failed
Status LED Off
Single-bus
Fibre Host
Disabled
9,600 baud
Disabled
Enabled
Not installed
Disabled for
JBOD
Enabled
Not installed
Advertisement
Table of Contents
