Automatic Gas Console Output Connections - Lincoln Electric FineLine 12864 Operator's Manual

FineLine 300HD Plasma System

3.9 Automatic Gas Console Output Connections

Refer to Figure 8 for the physical location of all connections.
Plasma Hose
1) Connect the plasma hose, which exits from the torch leads about 6 ft.
Shield Hose
2) Connect the shield hose, which exits from the torch leads about 6 ft.
Torch Leads
From ASC
This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to
non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.
(1.83m) from the torch end, to the fitting on the output side of the AGC
labelled with the symbol shown.
(1.83m) from the torch end, to the fitting on the output side of the AGC
labelled with the symbol shown.
Figure 8: AGC Outputs
Page 38 of 118
BK8053-000107 Rev A.01
Torch Leads
(Torch End)