Lincoln Electric FineLine 12864 Operator's Manual page 46

FineLine 300HD Plasma System
3) Select Internet Protocol Version 4 (TCP/Ipv4) and then the Alternate
Configuration tab. In the User configured section, enter the IP address and
Subnet mask shown below.
3.16.2 Plasma Console App
Installation
If the System uses a non-Lincoln Electric HMI (CNC Controller or Industrial
Computer), the Plasma Console App must be installed. Installation of the Plasma
Console App is not required when using a Lincoln Electric provided HMI.
Contact Factory for Plasma Console App Installer.
This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to
non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.
Page 46 of 118
BK8053-000107 Rev A.01