Fineline Plasma Console App - Operation - Lincoln Electric FineLine 12864 Operator's Manual

BK8053-000107 Rev A.01
4.3 FineLine Plasma Console App – Operation
4.3.1 Overview
The FineLine Plasma Console App is the user interface for the entire System. It runs
on the HMI, which can be a CNC Controller or Industrial Computer.
Screen Navigation and System ON Button
Press the navigation buttons along the bottom of the screen to access all the
settings and parameters described in this section.
Important Icons
Icons at the top of the screen provide important information about the System.
This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to
non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.
Screen Navigation Buttons
Press to access the desired screen.
System ON Button
Refer to Section 4.1.2.
Page 53 of 118
FineLine 300HD Plasma System
Edge start recommended
System warning
Actively Marking
Actively Cutting
AGC is purging gases
AGC connected
AGC not connected
RS-485 termination
applied.