Fineline Plasma Console App & Cutlinc Server; Ethernet Router/Switch - Lincoln Electric FineLine 12864 Operator's Manual

BK8053-000107 Rev A.01
2.10 FineLine Plasma Console App & CutLinc Server
A Human Machine Interface (HMI) is required to run the FineLine Plasma System.
The HMI can be a CNC Controller or Industrial Computer running the FineLine
Plasma Console App and CutLinc Server.
The Fineline Plasma Console App is the user interface for the FineLine Plasma
System. CutLinc Server is the communication hub for the FineLine Plasma System.
They are already integrated into certain Lincoln Electric HMIs. Other HMIs require
both to be integrated by the OEM or end-user.
Specifications for the HMI:
 Windows 10 operating system
 One (1) Ethernet port
Specifications for the Plasma Console App and CutLinc Server:
 Controls up to four FineLine 300HD Systems

2.11 Ethernet Router/Switch

A user-supplied Ethernet router/switch is required with the following specifications:
 Four (4) Channel (minimum)
 10/100 Mbps (minimum)
 IEEE 802.3(x) Compliant
 Auto MDI / MDIX
This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to
non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.
Page 19 of 118
FineLine 300HD Plasma System