Lincoln Electric FineLine 12864 Operator's Manual page 55

BK8053-000107 Rev A.01
4.3.3 Prepare to Cut or Mark
Press the Material button and then select the Material Type, Thickness, and
Process. The Plasma Console App uses those selections to automatically set the
Current (Amps), Gas Types, and Pressures.
This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to
non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.
Select the Material Type
Press the Material Type button and
then select the material to be
processed.
Select the Material Thickness
Press the Thickness button and
then select the thickness of the
material to be processed. Or, press
the data entry button (
manually enter the material's
thickness.
Select the Process
Press to select the desired process.
The selected process will be red.
Cut (
the thickness of the metal.
Mark (
mark in the surface without cutting
all the way through the metal.
Grid Mode (
continuous workpiece, like
expanded metal.
Page 55 of 118
FineLine 300HD Plasma System
) – cuts completely through
) – creates a noticeable
) –cuts a non-
) to