BK8053-000107 Rev A.01
6.5.2 AGC Firmware, Plasma Console App, and CutLinc Server
AGC Firmware, Plasma Console App, and CutLinc Server are all updated or
installed using a FineLine ServicePack:
• FineLine ServicePack AO (p/n BK602650) is for Lincoln Electric HMIs, like
Burny and Visual Machine Designer (VMD).
• FineLine ServicePack SA (p/n BK602651) is for non-Lincoln Electric HMIs.
The update procedure is the same for both ServicePacks:
With the System powered, unzip the ServicePack onto the HMI's local drive
and then open the unzipped folder.
Run 'FineLineServiceInstaller.exe'.
Follow the on-screen prompts to complete the update.
Use the Plasma Console App to verify the installed versions;
(Diagnostics > Versions Tab).
End of procedure.
This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to
non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.
Page 83 of 118
FineLine 300HD Plasma System