6.After opening, click
there is no error warning in the console below, it means that the Upload is successful.
7.After successfully running the program, You will see that all the servos will turn
to 90 degrees.
【Note】:
For the adjusted servos, it is forbidden to rotate them when assembling the
robotic arm, otherwise it will cause errors in the assembly of the robotic arm.
8.Now you can proceed to the assembly operation of Lesson 6
to upload the code program to the Arduino UNO. If
61
Need help?
Do you have a question about the Robotic Arm and is the answer not in the manual?