Run The Processingwritinganddrawing.pde - ADEEPT Robotic Arm Manual

6.After opening, click
Board. If there is no error warning in the console below, it means that the Upload is
successful.
7.After downloading, close WritingAndDrawing.ino
8.Note that the arm is still connected to the computer with the USB cable.Turn on
the power supply.

13.2 Run the ProcessingWritingAndDrawing.pde

Note that the arm is still connected to the computer with the USB cable.Turn
on the power supply.
1.Open the Processing software, as shown below:
to upload the code program to the Adeept Arm Drive
173