Verify; Code Editing Area; Console - ADEEPT Robotic Arm Manual

Button bar includes functions of Verifying,Uploading,Building New,Opening and
Saving.
（1）Verify
Checking and compilation. This button is used to check the correctness of your
"syntax" or code. If your code has any syntax errors or undefined variables, an error
message will appear at the bottom of the IDE screen. At the same time, the line of
error code will be marked with a red background color for easy modification. But if it
is correct, you will see the message that the compilation is complete.
（2）Upload
Download the program code to the Arduino development board. It is better to
click Verify first, and then click Upload.
（3）New
：
Open a new program editing window to create a new project.
（4）Open
This button can open an existing draft file. You will use it when you need to open
a file that you have downloaded or used before.
（5）Save
：
Save the program file being edited.

(3)Code editing area

The code editing area is where to write program code and code comments.

(4)Console

The debug window will output information showing various compilation and
debugging results. For example, if your code is written incorrectly, you will be
prompted about what went wrong.
：
：
：
21