ADEEPT Robotic Arm Manual page 115

pySerial encapsulates the serial communication module,supporting Linux,
Windows, BSD (may support all operating systems that support POSIX), Jython (Java)
and IconPython (.NET and Mono). The pyserial module encapsulates access to the
serial port.The port number starts from 0 by default.There is no need to know the port
name in the program. APIs like file reading and writing, read and write (readline, etc.
are also supported), support binary transmission, no null elimination, no cr-lf
conversion. All programs are completed by Python In addition to the standard library,
it does not depend on other packages, except pywin32 (windows), JavaComm
(Jython). POSIX (Linux, BSD) only depends on the Python standard library.APIs like
file read and write, read, write (readline, etc. are also supported), support binary
transmission, no null elimination, no cr-lf conversion, all programs are all done by
Python, and do not depend on other packages except the standard library, except
pywin32 (windows), JavaComm (Jython). POSIX (Linux, BSD) only depends on the
Python standard library.
Before downloading and installing, you need to connect the Adeept Arm Drive
Board development board to your computer.
(1) Press Win+R shortcut key to open CMD under Windows 10:
(2) Click "OK":
112