Steering Speed; Steering Punch; Steering Curve; Steering Reverse - Ko Propo EX-10 eurus Instruction Manual

TRIMRATE 10
ENTER ENTER
>SPEED >
PUNCH OFF
ST: - ...... I ...... +
BACK BACK
BACK BACK
SPEED >
OFF
>PUNCH
CURVE OFF
BACK BACK ST: - ...... I ...... +
ENTER ENTER
PUNCH OFF
OFF
>CURVE
REVERSE OFF
BACK BACK ST: - ...... I ...... +
ENTER ENTER
CURVE OFF
>REVERSE OFF
DualRate >
BACK BACK ST: - ...... I ...... +
NEXT▼
All manuals and user guides at all-guides.com
【Steering speed】 sets servo s working speed.
＞T.Pos ／ R.Pos：1〜100%
50%
>T.Pos
Turn1 100
＞Turn ／ Retun：1
Turn2 100
R.Pos 50%
This function allows for steering speed adjustment in first part
Return1 100
(Turn1/Return1) and later part (Turn2/Return2) separately.
Return2 100
Timing of switching first/later part also can be adjusted
ST:SPEED
(T.Pos/R.Pos).
Choose with [ ], set with [ ]
To reset values press both [ ] for a second
※Setting effect varies according to 【Response (P25)】 .
【Steering punch】
sets steering output from 1% (right and left)
position from center （OFF 〜80%）
Set with [ ] or [ ]
Complete with [ ] (return)
To reset values press both [ ] for a second
【Steering curve】 sets change ratio of steering speed
（­100％〜 OFF 〜+100%）
­100％：
+100%：
Set with [ ] or [ ]
Complete with [ ] (return)
To reset values press both [ ] for a second
【Steering reverse】 changes the direction of servo movement
（OFF, ON）
《Example》 Direction of steering and servo is opposite due to servo
installation.
Set with [ ] or [ ]
〜100
（slow） （quick）
+ ‒
+ ‒
+ ‒
ENTER ENTER
+ ‒
first part (slow) / later part (quick)
first part (quick) / later part (slow)
+ ‒
ENTER ENTER
+ ‒
+ ‒
ENTER ENTER
19