KidKraft RIDGEVIEW DELUXE CLUBHOUSE PLAY SYSTEM Installation And Operating Instructions Manual page 60

Step 29: Lower Front Wall Assembly
Part 2
E: Measure 15" from the outside edge of (1500) Post on the Cafe Wall side. From the inside of the assembly
attach 1 (1814) Wall Support to (0799) Floor Back and (0351) Front Back with 4 (S1) #8 x 1-1/8" Wood Screws as
shown in fig. 29.3, 29.4 and 29.5.
F: Measure 9" from the outside edge of (1500) Post on the Swing Wall side. From the inside of the assembly
attach 1 (1814) Wall Support to (0799) Floor Back and (0351) Front Back with 4 (S1) #8 x 1-1/8" Wood Screws as
shown in fig. 29.4 and 29.5.
G: Measure 23-3/16" from the outside edge of (1500) Post on the Swing Wall side. From the inside of the
assembly attach 1 (1814) Wall Support to (0799) Floor Back and (0351) Front Back with 4 (S1) #8 x 1-1/8" Wood
Screws as shown in fig. 29.4 and 29.5.
All (1814) Wall Supports should cover the pilot holes in (1849) Cedar Siding. (fig. 29.3)
Fig. 29.3
Cafe Wall Side
1814
Wood Parts
3 x Wall Support 1 x 4 x 45-1/2"
1814
Swing Wall Side
1814
1814
0799
1814
Hardware
12 x
Fig. 29.4
Fig. 29.5
0351 S1
x 4 per board
#8 x 1-1/8" Wood Screw
S1
60
15"
1500
1814
Inside Fort
23
3/16"
9"
1500