KidKraft RIDGEVIEW DELUXE CLUBHOUSE PLAY SYSTEM Installation And Operating Instructions Manual page 33

Step 11: Swing Wall Assembly
Part 2
Note: Pre-drill all holes using a 1/8" drill bit before installing the lag screws.
D: Attach 1 (0369) Lower Diagonal to each end of (1872) Ground with 1 (H2) 1/4 x 2" Hex Bolt (with lock washer,
flat washer and t-nut) per diagonal. (fig. 11.2)
E: Attach the other end of (0369) Lower Diagonal to each (1500) Post with 1 (LS3) 1/4 x 3" Lag Screw (with flat
washer) per diagonal. (fig. 11.2)
Fig. 11.2
LS3
1/4" t-nut
Wood Parts
2 x Lower Diagonal 2 x 3 x 37"
0369
1500
0369
1/4" flat
washer
2 x
2 x
1/4" lock
1872
washer
Hardware
1/4 x 2" Hex Bolt (1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
H2
1/4 x 3" Lag Screw (1/4"flat washer)
LS3
33
1500
LS3
1/4" flat
washer
0369
H2