Advertisement
Step 27: Door Wall Assembly
Part 2
D: Tight to the top of (0351) Front Back and tight to (1809) Door Trim attach 1 (1847) Siding to (1814) Wall
Support and (1500) Post with 2 (S0) #8 x 7/8" Truss Screws as shown in fig. 27.7.
E: Evenly space then install 10 more (1847) Siding directly above the first, attaching to (1814) Wall Support and
(1500) Post with 2 (S0) #8 x 7/8" Truss Screws per board. The top of the last (1847) Siding should be tight to the
bottom of (1869) Door Top. (fig. 27.7)
F: From inside the assembly, centred over the pilot holes in (1847) Siding, attach (1814) Wall Support to (1873)
Back Floor and (0351) Front Back with 4 (S1) #8 x 1-1/8" Wood Screws. (fig. 27.8)
G: From the outside of the assembly attach (1847) Siding to (1814) Wall Support with 1 (S0) #8 x 7/8" Truss
Screws per siding. (fig. 27.7)
Fig. 27.8
Boards removed
for clarity
1873
1847
1814
Wood Parts
11 x
Siding 3/8 x 3-1/2 x 24-7/8"
1847
1 x
Wall Support 1 x 4 x 45-1/2"
1814
Fig. 27.6
S1
0351
SolidWorks Lightweight - Out-of-Date Print
1814
1809
Hardware
33 x
#8 x 7/8" Truss Screw
S0
4 x
#8 x 1-1/8" Wood Screw
S1
55
1847
1869
x 3 per board
S0
0351
(hidden behind Door Trim)
1873
1500
(hidden behind siding)
Fig. 27.7
Advertisement
