KidKraft RIDGEVIEW DELUXE CLUBHOUSE PLAY SYSTEM Installation And Operating Instructions Manual page 23

Step 6: Monkey Rail Assembly
Pre-drill all pilot holes using a 1/8" drill bit before installing wood screws.
A: Insert 3 (578) 1-1/8 x 15-7/8" Dowels into both (1564) MK Rail Longs as shown in fig. 6.1. Note the pilot holes in
one of the (1564) MK Rail Long are on the bottom of the board.
3/4"
3/4"
B: Make sure shoulder of dowel is against
each rail before pre-drilling pilot holes. Drill
1/8" pilot holes through the rails and into the
dowels to prevent splitting. (fig. 6.2)
Fig. 6.3
S3
C: Attach (578) 1-1/8 x 15-7/8" Dowels to both rails with 2 (S3) #8 x 2-1/2" Wood Screws per dowel. (fig. 6.3)
Wood Parts
3 x Tennon Dowel 1-1/8 x 15-7/8"
578
2 x MK Rail Long 2 x 4 x 52"
1564
1564
578
Hardware
6 x #8 x 2-1/2" Wood Screw
S3
578
578
S3
23
Fig. 6.1
Note: Pilot holes at
bottom of this rail
578
1564
Note: Pilot holes
at top of board
Fig. 6.2
1564
578
1564