Advertisement
Step 9: Roof Assembly
Part 2
D: Starting at the top of the Roof Support Assembly attach 1 (0517) Cedar Roofing on each side of the (0863)
Roof Supports and (0501) Joists with 3 (S0) #8 x 7/8" Truss Screws per board. (fig. 9.2) Be sure to overlap the top
of the boards so there are no gaps. (fig. 9.3)
E: Drill a hole 1-1/2" up from the bottom of the 2 bottom (0517) Cedar Roofing (for bottom row only). Attach 1
(0517) Cedar Roofing at the bottom of the Roof Support Assembly on each side, making sure they are flush to
each (0863) Roof Support with 3 (S0) #8 x 7/8" Truss Screws. (fig. 9.2 and 9.4)
F: On one side of the assembly evenly space and attach 11 (0517) Cedar Roofing, leaving no gaps, with 3 (S0)
#8 x 7/8" Truss Screws per board. There should be 13 (0517) Cedar Roofing on this side. (fig. 9.2)
G: On the other side of the assembly evenly space and attach 9 (0517) Cedar Roofing, leaving no gaps, with 3
(S0) #8 x 7/8" Truss Screws per board. This will be the front of the Roof Assembly. (fig. 9.2)
Fig. 9.2
1-1/2"
Fig. 9.3
Overlap cedar roofing
Roof Supports
removed for clarity
Wood Parts
24 x
Cedar Roofing 3/8 x 3-1/2 x 48"
0517
0517
0863
0863
1-1/2"
Hardware
72 x
#8 x 7/8" Truss Screw
S0
27
Fig. 9.4
0501
Flush to edge
S0
x 3 per board
Advertisement
