KidKraft RIDGEVIEW DELUXE CLUBHOUSE PLAY SYSTEM Installation And Operating Instructions Manual page 53

Step 26: Lower Swing Wall Assembly
Part 2
F: From inside the assembly, centred over the pilot holes in (1852) CE Siding, attach 2 (1858) Short Wall
Supports to (0839) CE Gap Board and (1872) Ground with 4 (S1) #8 x 1-1/8" Wood Screws per board. (fig. 26.3
and 26.4)
G: From the outside of the assembly attach (1852) CE Siding to each (1858) Short Wall Support with 2 (S0) #8
x 7/8" Truss Screws per siding. (fig. 26.5 and 26.6)
Fig. 26.3
Fig. 26.5
Wood Parts
2 x Short Wall Support 1 x 4 x 24-1/4"
1858
Fig. 26.4
0839
1852
1872
Hardware
12 x
S0
8 x
S1
S1 x 4 per board
Fig. 26.6
1858
#8 x 7/8" Truss Screw
#8 x 1-1/8" Wood Screw
53
x 12
S0
1852