Advertisement
Step 18: Attach Ground Stakes
MOVE FORT TO FINAL LOCATION. FINAL LOCATION MUST BE LEVEL GROUND
Warning! To prevent tipping and avoid potential injury, stakes must be
driven 10-1/2" into ground. Digging or driving stakes can be dangerous if
you do not check first for underground wiring, cables or gas lines.
A: Drive 2 (0318) Ground Stakes 10-1/2" into the ground at both ends of (1872) Ground into each (0369)
Lower Diagonal as shown in fig. 18.1. Attach using 2 (S3) #8 x 2-1/2" Wood Screws per ground stake.
Fig. 18.1
S3
Wood Parts
2 x
Ground Stake 1-1/4 x 1-1/2 x 14"
0318
0369
1872
S3
0318
Hardware
4 x
#8 x 2-1/2" Wood Screw
S3
41
Fig. 18.2
S3
10-1/2" Into Ground
0369
Advertisement
