Advertisement
Step 21: Cafe Window Assembly
Part 1
A: Place 1 (1859) Wall Trim tight to the top of (1501) Floor End and flush to the outside edge of (1500) Post on
the Cafe Wall side of the assembly. Attach to (1500) Post with 2 (S2) #8 x 1-1/2" Wood Screws. (fig. 21.1 and
21.2)
B: Tight to top of (1501) Floor End and tight to (1859) Wall Trim attach (1852) CE Siding to both (1500) Posts
with 2 (S0) #8 x 7/8" Truss Screws as shown in fig. 21.2. Make sure Cafe Canopy is pinched between (1852) CE
Siding and (1501) Floor End.
C: Tight to (1852) CE Siding and top of (1501) Floor End attach a second (1859) Wall Trim to (1500) Post with 2
(S2) #8 x 1-1/2" Wood Screws. (fig 21.2)
D: Install 2 more (1852) CE Siding directly above the first, attaching to both (1500) Posts with 2 (S0) #8 x 7/8"
Truss Screws per board. The top of the last (1852) CE Siding should be flush to the top of each (1859) Wall Trim.
(fig. 21.2)
E: Tight to the top of both (1859) Wall Trims and flush to the edges of both (1500) Posts, attach (1851) Cedar
Floor Board with 4 (S2) #8 x 1-1/2" Wood Screws. (fig. 21.2)
F: Tight to the bottom of (1864) SL Roof Side and flush to the edges of both (1500) Posts, attach (1867) Top Side
with 4 (S2) #8 x 1-1/2" Wood Screws. (fig. 21.2)
S2
1867
1500
S0
S2
x 4 per
side
1852
Wood Parts
1 x
Top Side 1 x 6 x 38-1/4"
1867
1 x
Cedar Floor Board 1 x 5 x 38-3/4"
1851
2 x
Wall Trim 1 x 2 x 10"
1859
3 x
CE Siding 3/8 x 3-1/2 x 36"
1852
Fig. 21.2
1859
S0
1864
S2
1500
1851
Flush
1859
1501
Hardware
12 x
#8 x 1-1/2" Wood Screw
S2
6 x
#8 x 7/8" Truss Screw
S0
44
Cafe Wall Side
Fig. 21.1
Advertisement
