KidKraft RIDGEVIEW DELUXE CLUBHOUSE PLAY SYSTEM Installation And Operating Instructions Manual page 36

Step 14: Front Frame Assembly
A: Attach (1855) Divider to (0799) Floor Back with 1 (H1) 1/4 x 1-1/2" Hex Bolt (with lock washer, flat washer and
t-nut) and to (1505) Front Top with 1 (PB2) 1/4 x 1-1/4" Pan Bolt (with lock washer, flat washer and t-nut). (fig.
14.1 and 14.2)
B: Make sure (1505) Front Top is level and then attach to both (1500) Posts using 4 (S7) #12 x 2" Pan Screws
(with 3/16" flat washers). (fig. 14.2)
Fig. 14.1
Wood Parts
1 x Front Top 1 x 5 x 46-1/2"
1505
1 x Divider 1 x 4 x 34-11/16"
1855
1/4" t-nut
1505
1500
Front
Hardware
4 x S7 #12 x 2" Pan Screw (3/16" flat washer)
1 x 1/4 x 1-1/4" Pan Bolt (1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
PB2
1 x 1/4 x 1-1/2" Hex Bolt (1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
H1
36
1/4" flat
washer
Fig. 14.2
3/16" flat
washer
1505
1855
1/4" t-nut
0799
1/4" flat
washer
1/4" lock 3/16" flat
washer washer
PB2
S7
1855
H1
1/4" lock
washer