KidKraft RIDGEVIEW DELUXE CLUBHOUSE PLAY SYSTEM Installation And Operating Instructions Manual page 35

Step 13: Back Frame Assembly
A: Attach (1860) MK Mount to (1873) Back Floor with 1 (H13) 1/4 x 3-1/2" Hex Bolt (with lock washer, flat washer
and t-nut) and to (1857) Top Back with 1 (H12) 1/4 x 3" Hex Bolt (with lock washer, flat washer and t-nut). (fig.
13.1 and 13.2)
B: Make sure (1857) Top Back is level and the distance between the bottom of (1857) Top Back and the top of
(1873) Back Floor is 28-5/8", then attach to both (1500) Posts using 4 (S7) #12 x 2" Pan Screws (with 3/16" flat
washers). (fig. 13.2)
Fig. 13.2
with 3/16"
S7
flat washer
1/4" lock
H12
washer
H13
1/4" lock
washer
Wood Parts
1 x Top Back 1 x 4 x 46-1/2"
1857
1 x MK Mount 2 x 3 x 34-13/16"
1860
1500
1857
1/4" flat
washer
with 3/16"
S7
flat washer
1860
1/4" flat
washer
1873
1/4" t-nut
1500
1500
28-5/8"
1/4" t-nut
1873
Hardware
4 x #12 x 2 Pan Screw (3/16" flat washer)
S7
1 x 1/4 x 3" Hex Bolt (1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
H12
1 x 1/4 x 3-1/2" Hex Bolt (1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
H13
35
Fig. 13.1
1857
1860
1500