Advertisement
Step 29: Lower Front Wall Assembly
Part 3
H: Install and evenly space 5 (1850) Siding in the large opening between (1849) Cedar Sidings, attaching to (1500)
Post and 2 (1814) Wall Supports with 3 (S0) #8 x 7/8" Truss Screws per board. (1850) Siding should be flush to
outside edge of (1500) Post. (fig. 29.6 and 29.7)
I: Remove the (LS3) 1/4 x 3" Lag Screw (with flat washer) from the top of (0369) Lower Diagonal and have a helper
hold it to the right of the assembly while installing the next siding pieces. (fig. 29.6 and 29.7)
J: In the small opening between (1849) Cedar Sidings attach and evenly space 5 (1848) CE Siding flush to outside
edge of (1500) Post and to (1814) Wall Support with 2 (S0) #8 x 7/8" Truss Screws per board.
(fig. 29.6 and 29.7)
K: Pre-drill with a 1/8" drill bit though (1848) CE Siding then re-attach (0369) Lower Diagonal to (1500) Post with
the previously removed (LS3) 1/4 x 3" Lag Screw (with flat washer).
L: Attach (1849) Cedar Siding to each (1814) Wall Support with 3 (S0) #8 x 7/8" Truss Screws per siding.
→
(fig. 29.7)
Remove this lag
Fig. 29.8
LS3
x 3 per board
All (1850) Siding and (1848)
CE Siding should be evenly
spaced to ensure there are
no gaps. (fig. 29.7 and 29.6)
Wood Parts
5 x
Siding 3/8 x 3-1/2 x 26-3/4"
1850
5 x
CE Siding 3/8 x 3-1/2 x 9"
1848
→
(hidden behind boards)
1500
1849
0369
1814
S0
1850
1849
S0
x 3 per board
→
Fig. 29.7
Diagonal not shown for clarity
Hardware
46 x
#8 x 7/8" Truss Screw
S0
61
1500
0369
1849
Flush
1814
S0
x 2 per board
1848
Fig. 29.6
Advertisement
