Advertisement
Step 17: Attach Gap and Floor Boards
A: Place 1 (1853) Cedar Gap Board at each end of the assembly. Then starting on the Swing Wall side place
4 (1851) Cedar Floor Boards, 1 (1854) Centre Gap Board so the gap in the board fits around the (1860) MK
Mount, and 3 more (1851) Cedar Floor Boards. Make sure all boards are evenly spaced. (fig. 17.1)
B: Attach all boards to (0795) Side Joist, (0790) Floor Joist, (1875) Short Joist and (1871) Long Joist with 5
(S2) #8 x 1-1/2" Wood Screws per board. (fig. 17.1)
Fig. 17.1
1875
(Hidden under floor boards)
1853
(Hidden under floor boards)
Wood Parts
2 x
Cedar Gap Board 1 x 5 x 38-3/4"
1853
1 x
Centre Gap Board 1 x 5 x 38-3/4"
1854
7 x
Cedar Floor Board 1 x 5 x 38-3/4"
1851
1860
S2
x 50
0790
50 x
1851
1854
1851
Hardware
#8 x 1-1/2" Wood Screw
S2
40
Swing Wall Side
1871
(Hidden under floor boards)
1853
0795
(Hidden under floor boards)
Advertisement
