Advertisement
Step 9: Roof Assembly
Part 4
K: On the front of the Roof Assembly, on the sixth (0517) Cedar Roofing from the bottom, place (0522) Window
Dormer Cleat centred over the middle screw. Use the Dormer Assembly as a guide to make sure the spacing is
correct, pre-drill using a 1/8" drill bit, then attach (0522) Window Dormer Cleat to Roof Assembly from underneath
the assembly with 2 (S1) #8 x 1-1/8" Wood Screws. (fig. 9.7)
L: Hang the Dormer Assembly on the tenth (0517) Cedar Roofing and attach the Dormer Assembly to (0522)
Window Dormer Cleat with 2 (S5) #8 x 1/2" Pan Screws as shown in fig. 9.7.
M: Attach the 2 remaining (0517) Cedar Roofing to the Roof Assembly, leaving no gaps, with 3 (S0) #8 x 7/8"
Truss Screws per board. (fig. 9.8)
Wood Parts
1 x
Window Dormer Cleat 5/4 x 2 x 8"
0522
2 x
Cedar Roofing 3/8 x 3-1/2 x 48"
0517
Fig. 9.7
10th
0517
Fig. 9.8
2 x
S1
2 x
S5
6 x
S0
S1
0517
Hardware
#8 x 1-1/8" Wood Screw
#8 x 1/2" Pan Screw
#8 x 7/8" Truss Screw
29
Dormer Assembly
S5
0517
6th
0522
Front
S0
x 3 per board
Advertisement
