Replacing The Toner Cartridge - Oki Teriostar LP-1040 Series User Manual

Wide format printer
Hide thumbs Also See for Teriostar LP-1040 Series:
Table of Contents

Advertisement

Replacing the Toner Cartridge

Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
52
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
When the toner level is low, the icon below is displayed on the screen.
After the icon above appeared, about 100 m (3937.01 inches) of printing is possible.
However, prepare a new toner cartridge in advance to replace the toner.
When the toner runs out, the screen below is displayed. Replace the toner following
the procedure described below.
‘ When you open the toner door, you will see the Toner Replacement
TIP
label. Refer to this when replacing the toner cartridge.
Note
Do not print pages with a high print coverage rate just before the toner runs
out, such as pages with a lot of solid printing or reverse printing (white on
black). The Printer may be damaged when the toner runs out.
To avoid this, replace the toner as soon as possible when the toner level runs
low.
The Supply Toner screen may not disappear if you replace only one toner
cartridge after the toner has run out.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Teriostar lp-1040-mfTeriostar lp-1040

Table of Contents