Available Size Standards - Oki Teriostar LP-1040 Series User Manual

System Menu
T
Chapter
1
‹ Available Size Standards
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
104
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
Specifies the paper size standard for the Printer.
„ Various Paper Series
Specifies the paper size standard from the following.
A series, ARCH series, ANSI series, 30×42 series, MAP series, DIN series, User Defined
series
A series Rolls
ARCH series Rolls
ANSI series Rolls
30x42 series Rolls
MAP series Rolls
DIN series Rolls
User Defined series Rolls
<Parameter by selecting options>
Off
n
On
Note
The default value varies depending on the the Printer initialization category.
‹
It is not possible to set all these parameters to Off.
‹
When these parameters are changed from On to Off, the following related
‹
parameters may also be initialized.
- Size Standard in the Paper menu
- Size of Automatically Supplied Paper in PDL Setting
- Original size standard at copy setting
- Original size standard at submission setting
A0 (841 mm), A1 (594.5 mm), A2 (420.5 mm),
A3 (297.3 mm)
36 inches (914 mm), 24 inches (609.6 mm),
18 inches (457.2 mm), 12 inches (304.8 mm)
34 inches (863.6 mm), 22 inches (558.8 mm),
17 inches (431.8 mm), 11 inches (279.4 mm)
30 inches (762.0 mm), 15 inches (381.0 mm)
700 mm (27.56 inches), 500 mm (19.69 inches)
707 mm (27.83 inches), 500 mm (19.69 inches)
: Default value
n