Oki Teriostar LP-1040 Series User Manual page 25

2-stage 2-roll
feed mechanism,
compatible with
long pages
A wide
variety of paper
supported
High resolution
scanner
unction
MF
The Printer is equipped with a 2-stage roll feed mechanism
in which two types of roll paper are supported:
- A0 (or 36 inches)
- A1 (or 24 inches)
- A2 (or 18 inches)
- A3 (or 12 inches)
By selecting the roll paper from A0 to A4 depending on
the original documents, the Printer eliminates paper
waste and reduces running costs.
Also, the Printer outputs the long pages up to 10m (393.70
inches). For the maximum printing areas for the Printer,
see the list below.
Paper type Roll Paper
Used
Plain paper/ A0 roll paper
Recycled paper
A1 roll paper
A2 roll paper
A3 roll paper
Tracing paper A0 roll paper
(75g (2.65oz)/
A1 roll paper
2
m )
A2 roll paper
A3 roll paper
Tracing paper A0 roll paper
(60g (2.11oz)/
A1 roll paper
2
m ) /
A2 roll paper
Matte film
A3 roll paper
‘ Printing areas do not include the 3 mm (0.12
TIP
inches) on front end, 2 mm (0.08 inches) on rear
end, and 2 mm (0.08 inches) on both sides.
Plain paper, recycled paper, tracing paper (60 g (2.65oz)/
2 2
m and 75 g (2.11oz)/m ), and film are available in roll paper
format. Select the paper type depending on your purpose.
An original is scanned and copied at 600 dpi resolution.
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
T Features
Max. Printing Range
841×10m (33.11×393.70 inches)
594×10m (23.39×393.70 inches)
420×1220mm (16.54×48.03 inches)
297×920mm (11.69×36.22 inches)
841×2500mm (33.11×98.43 inches)
594×1830mm (23.39×72.05 inches)
420×1220mm (16.54×48.03 inches)
297×920mm (11.69×36.22 inches)
841×1220mm (33.111×48.03 inches)
594×920mm (23.39×36.22 inches)
420×610mm (16.54×24.02 inches)
297×460mm (11.69×18.11 inches)
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
25