Format Parameters (Only With Hp-Gl And D-Scan) - Oki Teriostar LP-1040 Series User Manual

Setup Items in PDL Settings Menu
T
Chapter
1
‹ Format Parameters (only with HP-GL and D-SCAN)
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
136
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
Format parameters specify the analysis conditions in the HP-GL format and D-SCAN
format.
Select this setting to:
- Use the LP-1040's printer driver;
- Operate without the touchpanel setting; and
- Print on a user defined series roll.
The user-defined roll width is specified with:
- The printer driver setting; or
- The touchpanel setting
When you intend to specify a user-defined roll width with the printer driver setting,
set the parameter to User Defined.
However, in spite of selecting User Defined, the user-defined roll width with touchpanel
setting is valid when the Printer receives data from the other printer drivers.