Powering Off - Oki Teriostar LP-1040 Series User Manual

‹ Powering Off
Before turning off the power, make sure that the Printer is ready to receive data
(standby screen is displayed).
1
After the shutdown process is completed, the power turns off.
2
Main power switch
Note
Always turn off the power using the POWER button on the operation panel.
‹
Directly turning off the main switch may damage the data stored inside the
Printer.
Do not turn off the power when the REMOTE lamp is flashing.
‹
Hold down POWER on the Printer's
panel for about 1 second.
When Shutting Down is displayed,
release the button.
If a job exists, it is saved automatically.
Printing for the saved job is available
the next time the power is turned on.
If the Printer will not be used for a long
time, turn off the main power switch.
Press the main power switch to the
side).
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
Turning the Power On/Off
T
side (lower
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
45