Paper Parameters - Oki Teriostar LP-1040 Series User Manual

Setup Items in PDL Settings Menu
T
Chapter
1
‹ Paper Parameters
n
Chapter
2
Chapter
3
Chapter
4
Chapter
5
n
Chapter
6
120
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
Size of Automatically Supplied Paper (only with HP-GL, TIFF, and CALS)
Sets the size standard of the supplied paper when the Paper Supply Mode is set to
Continuous or Optimal.
<Parameter by selecting options>
A Series
n
ARCH Series
ANSI Series
30x42 Series
MAP Series
DIN Series
User Defined Series
Note
The default value varies depending on the the Printer initialization category.
‹
Paper Supply Mode
Sets the paper supply conditions for the paper to be printed on.
<Parameter by selecting options>
Continuous
n
Optimal
Roll 1
Roll 2
Note
The default value varies depending on the Printer initialization category.
‹
: Default value
n
Automatically supplies A series paper.
Automatically supplies ARCH series paper.
Automatically supplies ANSI series paper.
Automatically supplies 30x42-inch series paper.
Automatically supplies Map series paper.
Automatically supplies DIN series paper.
Automatically supplies user defined series paper.
: Default value
n
The Printer prints continuously from the small roll to the large
roll when each drawing requires no clipping.
The Printer prints on the optimal roll for minimizing blank
space. When the optimal roll is not installed, the Printer
suspends the printing process, and requires the paper
replacement.
The Printer prints on the roll 1 paper.
The Printer prints on the roll 2 paper.