Print Density
Adjusts the print density.
<Parameter by selecting options>
Low
Slightly Low
Normal
n
Slightly High
High
Humidity for Tracing Paper
The parameter specifies the print mode for tracing paper.
<Parameter by selecting options>
Normal
n
High Humidity
Power Saving in Standby
This parameter specifies how energy is saved when the Printer is in standby.
When the parameter is set to Medium or High, power consumption can be
reduced even without entering the power save mode.
However, when printing, warm-up time may be longer and the Printer may not be
able to print immediately.
<Parameter by selecting options>
Off
n
Medium
High
: Default value
n
: Default value
n
Specifies the print mode for the tracing paper printed
under the normal environmental condition.
Specifies the print mode for the tracing paper printed
under the high-humidity environmental condition.
: Default value
n
Power saving is low, but warm-up time is short.
Power saving is fairly high, but warm-up time is fairly long.
Power saving is high, but warm-up time is long.
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
Printer Engine Menu
T
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
91