Raster Parameters - Oki Teriostar LP-1040 Series User Manual

Setup Items in PDL Settings Menu
T
Chapter
1
‹ Raster Parameters
Chapter
2
n
Chapter
3
n
Chapter
4
Chapter
5
n
Chapter
6
146
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
Raster parameters specify the condition to draw raster data.
Binary Image Scale
Sets the scaling mode when scaling binary image data.
<Parameter by selecting options>
Photo Mode
Line Art Mode
n
Screening (only with HP-GL and D-SCAN)
The parameter specifies the screening method for multi-valued image.
<Parameter by selecting options>
Line Art Mode
n
Graphic Mode
Photo Mode
Uniformity effects
This setting can be used only when Graphic Mode is selected in the Screening
setting.
This setting further reduces density unevenness in case density unevenness in the
low-density parts appears in spite of the Graphic Mode selected for the Screening
setting.
<Parameter by selecting options>
Standard
n
Better uniformity
High uniformity
: Default value
n
Maintains the density when scaling binary image data.
(Performs simple sampling.)
Maintains the lines when scaling binary image data.
: Default value
n
For multi-valued image data, performs screening suitable
for line art.
For multi-valued image data, performs screening suitable
for computer graphics.
For multi-valued image data, performs screening suitable
for photos. Some processing time is required for Line Art
Mode and Graphic Mode.
: Default value
n
Uniformity processing is not performed.
Uniformity processing is performed. (Print quality is less
than with Standard.)
Uniformity processing is performed. (Print quality is less
than with Better uniformity.)