Communication Parameters - Oki Teriostar LP-1040 Series User Manual

System Menu
After settings are changed in this menu, the Printer restarts
exiting Menu Mode.
If there are waiting jobs, only browsing is available.
‹ Communication Parameters
The Printer is equipped with an Ethernet interface that enables the following
functions.
(1) Receiving, analyzing, and printing PDL data
(2) Sending scanned data to external computers
(3) Controlling the Printer scan function from an external computer
In Communication Parameters, select the various communication settings for
functions (1) to (3) above.
The Printer can use the following connection protocols.
IPv4
IPv6
Both protocols can be used at the same time.
IPv4 is always enabled.
IPv6 can be enabled or disabled. It is disabled by default.
n
Network Settings
z
Common Settings
y
IP Address
Sets the IP address (Internet address) of the Printer.
This parameter is the same as the parameter that is set in the installation operation.
<Parameter by entering numbers>
0.0.0.0 to 255.255.255.255
Default value: 192.168.100.100
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
on
( & page 86)
93
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6