Oki Teriostar LP-1040 Series User Manual page 286

Command Lists
T
Chapter
1
‹ TIFF Tags
The meaning of the symbols in the table is as follows.
Chapter
2
Chapter
3
NewSubfileType
Chapter
4
SubfileType
ImageWidth
ImageLength
BitsPerSample
Compression
Chapter
5 PhotometricInterpretation
FillOrder
StripOffsets
Orientation
SamplesPerPixel
Chapter
6
RowsPerStrip
StripByteCounts
MinSampleValue
MaxSampleValue
XResolution
YResolution
PlanerConfigration
XPosition
YPosition
T4Options
ResolutionUnit
Color Map
286
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
Yes: Indicates commands supported by the Printer.
Partially: Indicates the corresponding functions are partially supported by the Printer.
No: Indicates tags not supported by the Printer.
TIP
‘ The tags supported by the Printer are equivalent to TIFF Revision 4.0.
‘ When data larger than the spool buffer size is received, an error message is
displayed on the panel. The data is disregarded.
‘ If the Printer receives any non-supported tags, it ignores them.
Command
Name Hexadecimal
00FE
00FF
0100
0101
0102
0103
0106
010A
0111
0112
0115
0116
0117
0118
0119
011A
011B
011C
011E
011F
0124
0128
0140
Function
Specifies the type of image data.
Specifies the type of image data.
Specifies the number of pixels for each image line.
Specifies the number of image lines.
Specifies the number of bits for each sample.
Specifies the compression format.
Specifies the interpretation method for the values in the bitmap.
Specifies the format for storing pixel data in bytes.
Specifies the offset value for each strip.
Specifies the position of the image origin point, the pixel
forward direction, and the line forward direction.
Specifies the number of samples for each pixel.
Specifies the number of lines before each strip is compressed.
Specifies the number of bytes after each strip is compressed.
Specifies the minimum sample value.
Specifies the maximum sample value.
Specifies the number of pixels in each resolution unit in the
line direction.
Specifies the number of pixels in each resolution unit in the
row direction.
Specifies the format for storing each pixel element.
Specifies the offset value for the image X direction.
Specifies the offset value for the image Y direction.
Specifies the option information for T4 compression.
Specifies the physical unit of resolution units in the X
Resolution and Y Resolution tags.
Specifies the palette color table (RGB).
Supported
Partially
Partially
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Partially
Yes
Yes