Toner Replacement Procedure - Oki Teriostar LP-1040 Series User Manual

Wide format printer
Hide thumbs Also See for Teriostar LP-1040 Series:
Table of Contents

Advertisement

Replacing the Toner Cartridge
T
Chapter
1
‹ Toner Replacement Procedure
Chapter
2
Chapter
3
Chapter
4
Chapter
5
1
Chapter
6
54
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
Caution
The toner spills out when the green tape on the cartridge is
removed. To avoid the toner from spreading, remove the tape only
after installing the cartridge into the Printer and pulling it as far as it
goes to the left side.
Never refill an empty toner cartridge with toner. A malfunction may
result.
Note
Before replacing the toner cartridge, make sure that the power is on and
Supply Toner is displayed.
When the power is off, the toner amount is not detected. As such, even if the
toner cartridge is replaced correctly, the error is not canceled.
Wait until all printing jobs have finished before replacing the toner
cartridge. If replacement is performed during a printing operation, the
printing will stop, and the corresponding data may be lost.
Do not replace the toner cartridge twice consecutively.
Open the toner door.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Teriostar lp-1040-mfTeriostar lp-1040

Table of Contents