Replacing The Toner Cartridge - Oki LP-2060-MF User Manual

Replacing the Toner Cartridge

When the toner level is low, the icon below is displayed on the screen.
After the icon above appeared, about 100 m (3937.01 inches) of printing is possible.
However, prepare a new toner cartridge in advance to replace the toner.
When the toner runs out, the screen below is displayed. Replace the toner following
the procedure described below.
‘ When you open the toner door/document table
TIP
Note
Do not print pages with a high print coverage rate just before the toner runs
‹
out, such as pages with a lot of solid printing or reverse printing (white on
black). The Printer may be damaged when the toner runs out.
To avoid this, replace the toner as soon as possible when the toner level runs
low.
The Supply Toner screen may not disappear if you replace only one toner
‹
cartridge after the toner has run out.
the Toner Replacement label. Refer to this when replacing the toner
cartridge.
LP-2060/LP-2060-MF User's Manual for Basic Printer Operation
, you will see
MF
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
53 53