Replacing The Process Cartridge; Replacement Precautions - Oki Teriostar LP-1040 Series User Manual

Replacing the Process Cartridge

The following explains the procedure for replacing the process cartridge.
‹ Replacement Precautions
Warning
Note
Keep the process cartridge stored in its cardboard box. Unpack the package
‹
only just before using it.
When handling the process cartridge, hold the handles at each end firmly
‹
with both hands.
Handle the process cartridge carefully to prevent the photoconductor drum
‹
surface from being scratched or damaged.
Do not touch areas other than the handles of the process cartridge.
‹
Be sure to mount the process cartridge
‹
cover to protect the photoconductor drum
and prevent its light deterioration. Remove
the cover only when you are installing the
process cartridge into the Printer.
Black developing toner may be adhered to
‹
the photoconductor drum of a new process
cartridge. However, this is for maintaining the cartridge in a good condition,
so use the cartridge as is. The toner is cleaned automatically after the
cartridge is inserted into the Printer. So it does not affect the print quality.
To prevent the waste toner from being spilled, be careful not to expose the
‹
process cartridge to strong shaking, tilting, or impacts.
Do not place a process cartridge into a flame. An accident or fire
‹
may result.
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
Handles
Photoconductor
drum
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
65 65