Pdc (Print Data Converter) Parameters - Oki Teriostar LP-1040 Series User Manual

‹ PDC (Print Data Converter) Parameters
The Print Data Converter function converts print images into TIFF or PDF files when
the images are printed with the Printer, and then saves them in the Printer's PDC
box or a shared folder on a computer.
Up to 1000 files can be saved in the PDC box, which has a capacity of 39 GB. When
this number is exceeded, files are deleted from the oldest. Files are also deleted
when the PDC box retention period expires.
Files stored in the PDC box can be accessed using the WEB functions or
TerioStation2 (exclusive application).
n
PDC Parameters
This parameter sets the PDC function.
<Parameter by selecting options>
Off
n
Print + image conversion
Image conversion
n
File Save Destination
Specify the save destination of TIFF and PDF files created by Print Data Converter.
<Parameter by selecting options>
PDC Box
n
DestFolder for Submission
Note
For presetting of submission destinations, see
‹
T
: Default value
n
Print Data Converter is not performed. Printing only.
Print Data Converter is performed. Print images are
converted into TIFF files and stored in the PDC box when
printed.
Print Data Converter is performed.
Print images are converted into TIFF or PDF files and stored
in the PDC box or a shared folder without being printed.
: Default value
n
Save to the PDC box in the hard disk drive of the printer.
Files stored in the PDC box can be accessed using the
WEB functions or TerioStation2 (exclusive application).
Save to a folder defined as a destination folder for
submission preset on the computer.
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
Setup Items in PDL Settings Menu
& page 157.
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
Chapter
6
147