Top Cut At Door Open - Oki Teriostar LP-1040 Series User Manual

Printer Engine Menu
T
Chapter
1
Chapter
2
Chapter
3
Chapter
4
‹ Top Cut at Door Open
Chapter
5
Chapter
6
90
LP-1040/LP-1040-MF User's Manual for Basic Printer Operation
<Parameter by selecting options>
Off
n
30 minutes
1 hour
2 hours
4 hours
1 minute
5 minutes
10 minutes
With Top Cut at Door Open, the Printer can cut the top of the roll paper automatically
when printing the first data job after the drawer for rolls 1 and 2 is opened or closed.
The cut width is 400 mm (15.75 inches).
TIP
‘ With this function, the top of the roll paper is cut with the printer's
cutter. Set for a clean cut on the top of the paper of the output page.
<Parameter by selecting options>
Off
n
On
: Default value
n
Does not cut.
Cuts the paper if the printer is not operated for 30
minutes.
Cuts the paper if the printer is not operated for 1 hour.
Cuts the paper if the printer is not operated for 2 hours.
Cuts the paper if the printer is not operated for 4 hours.
Cuts the paper if the printer is not operated for 1 minute.
Cuts the paper if the printer is not operated for 5 minutes.
Cuts the paper if the printer is not operated for 10
minutes.
: Default value
n
Does not cut the paper.
Cuts the paper.