Using The Command And Response Table - Extron electronics FOX3 SR 20 User Manual

Using the Command and Response Table

The command and response table begins below. Symbols are used throughout the table
to represent variables in the command and response fields. Command and response
examples are shown throughout the table. The ASCII to HEX conversion table below is for
use with the command and response table.
ASCII to Hex Conversion Table
Space
•
NOTE: For commands and examples of computer or device responses used in this
guide, the character "0" is the number zero and "O" is the capital letter "o."
FOX3 SR 201 Scaling Receiver • SIS Configuration and Control 24