Introduction; About This Guide; Product Description - Extron electronics FOX3 SR 20 User Manual

Fiber optic hdmi scaling receiver
Table of Contents

Advertisement

Introduction

AVERTISSEMENT : Le FOX3 SR 201 émet une lumière invisible en continu (conforme

About this Guide

This guide contains information about the Extron FOX3 SR 201 fiber optic scaling receiver.

Product Description

The FOX3 SR 201 Scaling Receiver is an ultra-high performance fiber optic receiver to
accept proprietary optical signals from long haul transmission of the following over two fiber
optic cables (see
The scaling receiver extends HDMI signals up to:
The receiver can receive RS-232 and IR from controlled devices and send them to the
transmitter via a proprietary optical signal.
The receiver has many controls, including audio adjustments, that are available under
Remote RS-232 and USB port Simple Set Instruction (SIS) control and PCS. The scaling
receiver has video, HDCP, fiber light status, and lost-light alarm indicators.
NOTE: The FOX3 receiver is compatible with all Extron FOX3 transmitters. The FOX3
WARNING:
The FOX3 SR 201 output continuous invisible light (Class 1 rated),
which may be harmful to the eyes; use with caution.
à la classe 1) qui peut être dangereux pour les yeux, à utiliser avec précaution.
Do not look into the rear panel fiber optic cable connectors or into the fiber optic
cables themselves.
Ne regardez pas dans les connecteurs de câble fibre optique sur le panneau arrière
ou dans les câbles fibre optique eux-mêmes.
Plug the attached dust cap into the optical transceiver when the fiber optic cable is
unplugged.
Branchez la protection contre la poussière dans l'ensemble émetteur/récepteur
lorsque le câble fibre optique est débranché.
figure 1
on page 2):
Uncompressed or visually lossless HDCP-compliant 4096x2160 or 3840x2160 (UHD)
@ 60 Hz HDMI video with Deep Color
2-CH LPCM audio
RS-232 and IR control signals
20 km (12.4 miles) for the singlemode cables
500 m (1640 feet) with 50 µm OM4 4700 MHz bandwidth laser optimized multimode
cables (see
Fiber Cable Transmission Modes
products are not compatible with legacy FOX, FOXBOX, FOX II, PowerCage 401 FOX,
or PowerCage 1600 FOX products.
on page 2).
FOX3 SR 201 Scaling Receiver • Introduction
1

Advertisement

Table of Contents
loading

Table of Contents