Table of Contents
Advertisement
5.
When finished, click SAVE to
set the passwords. To close
the window without saving a
password, click CANCEL or the X in
the upper-right corner.
NOTE: Passwords can be changed
but they cannot be removed
entirely. The FOX3 must have
passwords at all times. These
fields cannot be blank.
LinkLicense Panel
The LinkLicense panel (see figure 33,
LinkLicense applied to the FOX3 device (A LinkLicense can be uploaded using the Extron
Toolbelt software. See
software).
NOTE: A user must have an Insider Account to download and use ToolBelt Software.
Contact an Extron support representative, to obtain an Insider Account.
Figure 41.
Software/Firmware Installation
LinkLicense Panel
FOX3 SR 201 Scaling Receiver • Internal Web Page
Figure 40.
Passwords Dialog Box
on page 41) displays information about any
6
on page 31 to download the
45
Advertisement
Table of Contents
