Using The Menu Screens - Extron electronics FOX3 SR 20 User Manual

Using the Menu Screens

To open the on-screen menu:
1. Connect a display device to the
HDMI output (see
page 5).
2. Press the Menu or Enter button
to open the on-screen menu.
To navigate the on-screen menu:
1.
Press the  and  buttons to
move through the submenus
(left) panel. The table on the
previous page shows the two
submenus and the items they
contain.
2. Press Enter or  to select a
submenu and display its items
in the right panel.
3. Press the  and  buttons to
move the blue selection border
to the desired submenu item
(see the example at right).
4. Press Enter to select the item.
5.
Press the  button to return to the list of submenus in the left panel.
To adjust the settings of a submenu item:
1. Navigate to an adjustable submenu item and press the Enter or  button to select the
item.
2. Press the  and  buttons to adjust the setting or select a specific adjustable setting
within the selected submenu item.
If the selected submenu item has multiple adjustable settings, press the  and 
buttons to select a value.
3. Press the Enter button to accept the new value.
NOTE: To cancel a change, press the  button to return to the submenu list (left
column) without pressing Enter. Then, press the  or  button to move to a
different submenu.
To exit the on-screen menu system:
From any menu screen, press the Menu button to close the on-screen menu and exit the
system.
figure 2 on
Figure 10.
FOX3 SR 201 Scaling Receiver • Operation
On-screen Menu
14