Table of Contents
Advertisement
Device Info Submenu
Figure 11.
The read-only Device Info screen is listed first in the submenus (left) panel. This screen
contains information about the FOX3 scaling receiver, including unit name, firmware version,
internal temperature in Celsius and Fahrenheit, selected input device format and signal
information, and output signal information for all outputs.
Setup Submenu
Figure 12.
The Quick Setup submenu is displayed by default when the OSD opens, and provides
quick access to frequently-used settings. This submenu contains the following items:
•
Output Rate — Press the or buttons to select from a list of output resolutions.
Press the or buttons to select from a list of refresh rates (see Output Rate on the
Resolution table
NOTE: When a new resolution is selected, the refresh rate defaults to 60 Hz, except
for 576p which defaults to 50 Hz.
Device Info Submenu
Quick Setup Submenu
on page 26). The default setting is 1080p @ 60 Hz.
FOX3 SR 201 Scaling Receiver • Operation
15
Advertisement
Table of Contents
